|
Corrugated Galvanized Metal Cisterns |
|

|
Corrugated galvanized metal cisterns and
water storage tanks are available in sizes from 600 gallons to 440,000 gallons.
Hot-dipped galvanized steel components fabricated for high
strength. Steel is fabricated from 33% recycled metal. Geotextile interior liners to isolate main water liner
from steel components. Flexible membrane liner to contain
potable water inside of the tank. The water storage tank shall
be designed to store water with a density of 62.4 PCF in a seismic
zone 2B with a wind speed of 90 MPH, UBC Exposure C. Also available are elevated, cedar,
and wooden
tanks. The 0803 and smaller tanks can be shipped pre-assembled.
All tanks can be shipped. The corrugated galvanized metal
cisterns are bolt on and require assembly. The Rain Well is a
certified installer for these bolt-on cisterns.
More
info on sizes and models
|
|

|

|
.
|

|

|

|
|
Mated Cisterns |
|

|

|

|

|

|

|
|
Flat Seam Roof |
Hose Bib |
Float Level Switches |
Water Level Indicator |
High Rib Roof |
Low Level Alarm |
|
Contact
The Rain Well for a current price list for the galvanized metal cisterns |
|
 |
Flat Seamed Galvanized One
Piece Metal Cisterns and Rain Barrels |

|
| Rain Barrels |
Cistern capacity |
Size D x H |
Cistern capacity |
Size D x H |
| 55 gallons |
150 gallons |
3' x 2'9" |
830 gallons |
5' x 5'8" |
| 80 gallons |
200 gallons |
3'6" 2'9" |
1000 gallons |
5' x 7' |
| 90 gallons |
300 gallons |
3' x 5'8 |
1200 gallons |
6' x 5'8" |
 |
100 gallons |
400 gallons |
3'5" x 5'8" |
1480 gallons |
6' x 7' |
| 150 gallons |
500 gallons |
4' x 5'8" |
1630 gallons |
7' x 6' |

|
| 200 gallons |
630 gallons |
6' x 3' |
2015 gallons |
7' x 7' |
|
|
|
2500 gallons |
7'
x 8'6" |
Hand welded galvanized metal |
|
Custom sizes available on request up to 12'x 18',
15,200 gallons including rectangular tanks. |
| The Rain Well Metal Cisterns are 16 gauge
thick wall hand rolled and hand welded with cone top roofs. Support anchors and inspection hatch are
optional. Eyelets are also available for lifting. These
can be shipped nationwide at affordable prices. These galvanized
cisterns are one
piece units and are available with an interior protective coating
rated for potable drinking water. The tanks are
available with a 2" welded drain bulkhead fitting. 3"
or 4" welded fittings for intake and overflow come with the
cistern. The coating is rated for potable drinking water. |
|

|
 |
|
Flat roofs also available |
Hand welded galvanized metal |
|
|
Pump Control and Backup Water System |
|

|
Introducing the BrainBox by Munro. The BrainBox is a pump
controller, backup water controller and pump protection all in one package
specifically designed for
rainwater harvesting.
Simple and efficient, the BrainBox synchronizes source water with pump
requirements. If rainwater is available, the BrainBox uses the
stored rainwater first. If no rainwater is available, the BrainBox
utilizes a domestic or alternate water source to provide water to the pump
during a run cycle. Includes two 55 foot pigtailed float switches
with 55' cords, low pressure sensor and high temperature sensor. One float
will turn the pump off when no water is available in the cistern. The
pressure and temperature sensors are additional safety features for the
pump. The second float activates a 24V solenoid valve (not supplied)
to allow a secondary source of water to keep up with the pump and not fill
the cistern completely. The standard model is turned on by 24v signal from
a lawn controller. For the same price, models are available to operate the
BrainBox with 110 or 220 voltage source. Blue, grey, and stainless
steel finishes are available Brochure |

|
|
|
Blue and Grey: $335
|
|
Stainless Steel: $395
|
|
|
Cistern Controls |
|
Low Level Alarm |
Cistern Water Level Controller |
Wall Mounted Float Switch |
Wide Angled Float Swtich |
|

|

|

|
|
|
Low level audible and visible alarm. Requires float
level switch |
Auto cistern fill water turn on and shut off.
Requires two float level switches. |
Horizontal float switch for normally open or closed. |
|
|
|
|
|
Subterranean Tanks
|
|
The 500, 1400, and 1700 gallon cisterns are made to be buried and can be used for
either rainwater harvesting or grey water reclamation. Rotationally
molded, seamless, polyethylene tanks won’t rust or crack and are not
affected by chemicals. Ribbed design will support soil loads greater than
500 lbs. per square foot often seen at 3-foot burial depth. These cisterns
allow for ease of installation and handling. They are lightweight for easy
transportation and installation in the excavation. The flat bottom
makes it easier to compact bed during installation. The hold down
ledge helps keep the tank from floating. Threaded lids and
risers have a rubber gasket to provide a watertight seal and allows for a
manhole accessibility, optional 9” stackable risers make it much easier
to inspect system for pumping and real estate transactions. The low
profile tank allows for shallow excavation to meet required installation
depth. These tanks are converted to cisterns with a 4" inlet, 1-1/2" outlet,
and vent tube. These cisterns can be linked together for extra
capacity also. |
|
500 Gallon Tank |
1400 Gallon Tank |
1700 Gallon Tank |
| $904 |
$1510 |
$1691 |
 |
(click
to enlarge) |
 |
|

|

|
|
To order, contact The Rain Well. |
|
|
Subterranean Cistern/Tank Optional Riser
|
 |
9 inch optional riser for the subterranean cisterns and
tanks are 20 inches in diameter. The risers are sold
in 9 inch sections and can be stacked on top of each other
for extra height. |
|
|
|
Cistern Cap Vent with Screen |
 |
|
* Allows proper ventilation of the tank during filling.
* 2" Polypropylene Cap Vent with Screen.
* Eliminates vacuum effect during drainage.
* Bulkhead fittings not included.
|
|
|
| Above Ground Vertical
Poly Cisterns |
|
Link
to The Rain Well Cistern Overview
|
(click
to enlarge)
|
| Link
to All Available Potable
Water and Agricultural Tanks
Link
to the above ground Poly Cistern Brochure
|
|
This above ground Poly Cistern is built with quality and durability in mind made
with FDA approved resins. The Poly Cisterns are available in "algae resistant"
colors dark green and black. Standard features include a
vented lid and a 2" bulkhead fitting. The Poly Cistern includes a basket
strainer for the inlet, a 4 inch overflow with tight
sealing rubber grommets, and a 3/4"
garden hose valve assembly. An optional roof
washer or first flush device can easily be integrated with this tank. Also
optional is the rain barrel pump. The Poly Cisterns can be shipped
nationwide. Contact
The Rain Well for details. |
(click
to enlarge)
|
|
|
| To order, contact
The Rain Well. |
Price
List
|
|
200,
300,
330, 550, 750,
1000,
1200,
1600,
2000,
2500,
3000,
and 5000 gallon
cylindrical Poly Cisterns are available
|
|
Rectangular Poly Cisterns
|
|
|
100 gallon
|
|
200 gallon
|
|
300 gallon
|
|
|
Soft Cistern
|
|

(click to enlarge)
|
The Soft Cistern is durable, rugged, and
lightweight. The Soft
Cistern can be easily folded allowing for compact packing for inexpensive
shipping. Water storage usages
include rainwater harvesting, fire suppression, water conservation, irrigation,
gray water, livestock water, any other non-potable uses. This cistern can be used for outdoor water harvesting collection and storage and
can be easily placed in crawl spaces, cellars, or basements. It easily goes where hard polyethylene tanks cannot go.
For large rainwater storage capacity in your backyard or in remote
locations, this tank is the right choice when there is no easy access.
A single 1-1/2 inch female pipe thread
fitting is used for the inlet and outlet. Valve
assembly sold separately. Note: Some colors may not currently be
in stock.
|
| More
Information ...
|
|
| 467 Gallon Soft Cistern $399.95
|
|
|
233
Gallon Soft Cistern $239.95
|
|
|
Grundfos MQ Pump |
 |
|
The
Grundfos MQ is a compact pump and pressure boosting unit, purpose-designed
for domestic water supply such as rainwater storage and other applications where a compact and
reliable, easy-to-install pump is advantageous. The MQ is a self-priming
multistage centrifugal pump with an internal pressure tank. It self-primes from a well depth of down to 8
m within a maximum of 5 minutes. No external pressure tank is required.
The MQ series pumps delivers instant pressure without having an
external pressure tank. Specifications |
|
|
Munro
On-Demand and Constant Pressure Pumps |
 |
Available now from Munro Pump is a
on-demand constant pressure pump. Sprinkler irrigation pump
self-priming design, combined with old-world style and quality,
makes the LP series pump unique. A brass impeller surrounded by a
cast iron diffuser, bracket, and case, make this pump as strong as
those bought by your Grandfather! A double ball-bearing capacitor
start motor, drain valves, and mechanical shaft seal, round out
this easy service design. Manufactured in the US! The
only on-demand pump made in the US that delivers domestic
household pressure. A external pressure tank is not
required. These pumps deliver instant pressure without the
wait. Great for indoor plumbing.
Great for irrigation, lawn sprinklers, indoor plumbing, loading water trucks or
storage tanks.
Built to standards professionals recognize—pricing homeowners
appreciate! The latest self-priming design combines old-world
style and quality to make the Munro LP series pump unique.
Contact The Rain Well to purchase. |
- 3/4 or 1 HP pump
- 2.1 gallon pressure tank
- 20 psi on 40 psi off pressure switch
- 2" Threaded suction port
- 1" threaded discharge with check valve
- Heavy-duty cast iron construction
- Drain cocks on upper and lower case chambers
- Steel base plate
- Heavy-duty cap start pump motor
- Brass impeller
|
 |
|
|
Polypropylene T-Strainer for Pump
Sediment Pre-Filtering |
| This sediment filter is placed
inline with the pump. This ensures that no large sediments
will enter the pump and will prolong the pump life. Can also
be used before a sub-millimeter sediment filter to prolong the
sediment filter life. The clear bowl allows for visible
sediment and containment inspection. |
 |
 |
Black Bowl Order
|
- Durable type 304 stainless steel mesh
- 20 x 20 mesh screen included
- Easy to clean
- NPT female connection
- Black bowl keeps algae out for outdoor use
- Clear bowl recommended for indoor use
- For residential and light commercial applications
|
Clear Bowls
|
Black Bowls |
Clear Bowl Order
|
1/2": $12.00
3/4": $19.50
1" : $30.50
1-1/2": $32.50
|
1/2": $7.50
3/4": $11.50
1" : $23.50
1-1/2": $24.50 |
| The maximum water pressure
should not exceed 150 psi. |
|
|
|
Munro Complete Pro
Series Centrifugal Irrigation Pump Housing with Smart Box |
 |
THE REVOLUTIONARY COMPLETE PUMP PACKAGE.
- Fiberglass enclosure with lockable lid
- Quick disconnects
- SmartBox pump controller with alternate water source
Brochure |
|
|
Munro LP
Series Centrifugal Irrigation Pump
|
|
Specs PDF
|
1 HP - $455.00
|
Munro centrifugal irrigation pump with easy service design. The
irrigation pumps do not require instant pressure.
|
Brochure
|
|
|
Applications include Pond, Self-Priming, Contractor, Fountain, Irrigation, and Marine.
Motors are wired for 230v (high) as standard. To use on 115v (low) follow motor name plate wiring diagram. Motors are Lincoln brand. Pump rotation is CCW from pump-end.
|
|

|
Munro Residential Series SFLP pumps are engineered to exacting standards. The
diffuser, brackets, and volutes are all made of cast iron while the impeller is
constructed of polycarbonate. The SFLP series also feature leak-proof
mechanical seals, easy service design, heavy-duty double ball-bearing motors
and rugged yet economical construction. They are especially suited for general
purpose "lawn sprinkler" applications. In some applications the use
of a foot valve is recommended.
|
|
|
Munro SmartBox |
 |
The Munro SmartBOX™ works under the
simple theory that a pressure is built up in the volute of the
pump when a pump is working at optimal efficiency. If this
pressure does not exist, there is a problem within the pumping
system.
The SmartBOX™ monitors this pressure through the use of a
pressure switch located on the discharge side of a pump. At the
beginning, or anytime during a zone cycle, if water is not
available, the pressure will drop within the pump and the pressure
switch will signal a timer to begin counting. If pressure has not
built up over the timer cycle, the timer signals the pump to
shutdown to save itself before damage occurs.
The nice thing about the SmartBOX™ is the resetting of the
pressure switch is automatic. The next watering cycle after a shut
down will have the same opportunity to build pressure. Since the
switch measures lack of pressure, as long as the pump is capable
of rebuilding and maintaining pressure, the pump will be allowed
to run normally.
$249.95 |
|
Smart
BOX Features
SmartBOX
Brochure |
|
|
Munro StartBox
|
|
The starting choice for lawn control(lers). The pump start relay (PSR)
provides pilot duty operation for all types of electrically driven pump
equipment with available coil voltages of 24 volts, 110 volts, and 220
volts. All Munro Relays & pump protection systems are UL listed as
Enclosed Industrial Control Panels.
Features and Benefits
- Compatible with 110 or 220 volt, 3/4 HP thru 7-1/2 HP* single phase
pumps
- Compatible with 24 volt timed lawn controllers
|
|
|
Type of Enclosure
|
Coil Voltage
|
HP
|
Part Number
|
|
MPSR
|
24
|
3/4 thru 7-1/2
|
MPSR24
|
|
$42.95
|
MPSR
|
110
|
3/4 thru 7-1/2
|
MPSR110
|
|
MPSR
|
220
|
3/4 thru 7-1/2
|
MPSR220
|
|
| Pump Hat |
 |
$29.95
|
Shields and protects outdoor pumps from sun, rain, and dust.
Will not fade from Sun or ultraviolet rays. Sturdy heat resistance
white top and attractive blue sides. Made of heavy duty plastic
for long life and durability. No tools needed for
assembly. Assembles in minutes. Height is 8-3/4",
width is 8-1/2", and length is 13-1/4". Part number BD8200 |
 |
|
|
|
Flexible Suction Hose with Floating Inlet Filter |
 |
The floating inlet filter comes with a 6 foot flexible
suction hose. The floating inlet filter is designed to draw the
water just below the water surface which is the cleanest water in the
cistern. The unit comes with 6" diameter floating ball, a 1.2
mm mesh filter lead-free brass inlet sleeve, lead-free brass 1"
check valve, 6' suction hose, and 1" connection fitting. |
|
|
|
| $168.75 |
|
|
Suction Hose Kit Assembly with Foot Valve |
 |
The Suction Hose Kits offer heavy duty foot valve conveniently
preassembled on a PVC super flex critical OD suction hose.
Five, ten, and twenty feet lengths allow for various applications
while still using a preassembled kit. The foot valve keeps the
pump primed, keeps large debris from entering the pump intake, and
keeps the water from entering the tank from the suction hose.
For use in cisterns, tanks, ponds, rivers, and wells. Available in 1-1/2", 2", and 3" diameters. |
|
|
1-1/2" Foot Valves
|
|
The foot valve keeps the pump primed, keeps large debris from entering the pump
intake, and keeps the water from entering the tank from the suction hose.
For use in cisterns, tanks, ponds, rivers, and wells. Provides 1/8"
grate filtering Available in 1-1/2", 2", and 3" diameters.
|
|
|
1-1/2" $15.95
|
|
|
1-1/2" Slip Part number - FV150S
|
|
|
Munro Pond
Pumps |
 |
Residential submersible pond
pumps. Applications include rain barrel discharge, water
features, tank water circulating, gardening, dewatering, and water
supply or drainage. Features include high capacity
performance with efficient 100 watt and 150 watt energy saving
motor with low amperage, water cooled motor suitable for low water
level operation, stream lined design that makes it space
saving, interchangeable outlet discharge, Weather proof AAS
plastic with overheating protector, and durable to provide long
life expectancy. Comes with 10 foot cord 110 volts, single
phase. |
Pond 100 $197.65
Pond 150 $247.23
|
| |
Pump
Brochure
|
Especially suited for Rain Barrels, Pond, Portable, Submersible,
Sump, Dewatering, Fountain, and Circulation. |
|
|
Wide Angle Float Switch
|
|

$58.32
|
Molded male and female (piggy-back) plug with ground. Current inrush not
to exceed 22 amps. The wide angle mercury level control is direct acting,
in-line control system for automatically controlling 1/2 HP and smaller pump
motors. The unit has a piggy-back cord attached to the cord, allowing the
user to plug the pump directly into it, and plug the entire unit into a standard
grounded outlet. The wide angle mercury level is furnished with an
adjustable strap for mounting to the pump discharge pipe. Standard units
are preset at the factory for nine inch pump down range, but can be easily
adjusted to various pump down cycles by shortening or lengthening the cord
length at the pivot point. The level control is omni-directional; the
pumping differential is maintained in any horizontal plane. Cord length is
15'. Rated at 13 amps at 115 volts and 140°. Pipe mount
installation. |
|
|
|
|
|
Submersible Utility Pump |
 |
|
Cordless portable submersible pump now
available for only $40! Great
for pumping out grey water from bathtubs and rainwater from rain barrels. Uses 3 D-cell
batteries. Comes with a garden hose adapter. Pumps up to 200
gallons per hour. Runs up to 5 hours on 3 "D" size
batteries. Lifts water to a height of 4 feet. Can be
used as a siphon. 6-1/2" in height by 5-1/4" in
diameter. Comes with 42" hose that wraps around for convenient
storage. Batteries not included. |
|
|
5W Solar Water Pump System (No Longer
Available)
|
(click to enlarge)
|
This solar pumping system runs off of 12 volts DC. Included in this unit
is a 2.8 gpm flow rate pump housed in a weather tight box and an easily mounted
5-watt solar panel. The 12-volt DC battery is sold separately. The
solar panel charges continuously. The dimension of the box is
8.5"x6"x5.4". The SPS-5W solar panel dimensions are
13" x 13" and is only 1/2" thick. The pump’s maximum
current is 7 amps. The pump has an automatic shut-off switch when the
pressure reaches 45 psi. The pump has a built in check-valve, is
self-priming, and can run dry without damage. All fittings and connections
are included. The pump warranty is for two years. The SPS-5W solar
panel charges at 350 milliamps at 12 volts. This pump can drain a full 55
gallon tank is 20 minutes, a 100 gallon tank in 36 minutes, and a 200
gallon tank in 72 minutes. If this pump ran continuously for one hour
using 7 amps, it would take the SPS-5W solar panel 20 hours to replace the
charge in the battery. This unit is not recommended to use during the
winter. Shipping is not included in the price. Expect 3-4 weeks for
delivery. To order, contact
The Rain Well. |
|
|
10 Watt Solar Water Pump System For Rain
Barrels and Cabins
|
|
This solar pumping system runs off of 12 volts DC. Included in this unit
is a 2.5 gpm flow rate on-demand pump with automatic shut off and turn on and a
10 watt solar panel charger. The 12-volt DC battery
and battery box is sold separately. Assembly is required. The pump has an automatic shut-off switch when the
pressure reaches 40 psi. The pump has a built in check-valve, is
self-priming, and can run dry without damage. The 10 watt solar
panel charges at 600 milliamps at 17 volts. This pump can drain a full 55
gallon tank is 22 minutes, a 100 gallon tank in 40 minutes, and a 200
gallon tank in 880 minutes. If this pump ran continuously for one hour
using 7 amps (max.), it would take the 10 watt solar panel 5 hours to replace the
charge in the battery. This unit is not recommended to store outside during the
winter. The 10 watt solar charger includes mounting hardware and wire, permanently
mounted trickle charger, and aluminum frame and tempered glass
construction. Requires assembly.
|
|
|
$304.00
|
|
|
|
|
|
12
volt DC Deep Cycle Battery and Battery Case |

(click to enlarge)
|
This unit comes with a 12- volt DC deep cycle battery and battery
case. The case dimensions are 13"x10"x11". This battery is designed for on
demand pumps such as the pump in the SPS-5W unit. A strap is also
available to secure the battery case. Shipping is not
available for this product. Customer pick-up or arrangements for delivery
can be made.
To order, contact
The Rain Well. |
|
|
On Demand Rain Barrel and Cistern Pump
|
|
The Rain Barrel pump comes with garden
hose fittings and a 115ACV three-prong plug. This pump is great for 115VAC pressurized water
systems in cabins. This pump can also be used for general water transfer
and irrigation. This popular model has three independent pumping
chambers. This 115 volt automatic demand pump is very popular for
applications where a 110v-120v small water pump can be used. It is
designed for multiple-fixture intermittent duty applications.
Moving parts will not travel more than 1/8 inch to reduce friction and
"wear and tear". Does not include garden valve.
It pumps 3.3 gpm with a 40 psi shut-off pressure and features a 2 year warranty.
AC cord is 6'. Not recommended for
outdoor use during rainy weather.
Brochure
|
-
Quiet performance
-
Runs on 115V AC power
-
Self Priming
-
On-Demand automatic shut-off
-
Easy Installation
-
Runs dry without damage
-
Built-in check valve
-
Garden hose fittings are included
-
Dimensions: 8.70” x 5.00” x 4.50”
-
Flow rate: 3.0 GPM
-
Maximum current: 0.9 amps
-
Shut-off pressure: 40 psi
-
Includes mesh strainer
-
Includes 2 feet of garden hose
-
Requires pump cover for outdoor use during adverse weather
-
Must be stored indoors when not in use
|
|
|
|
$176.00
|
Other fittings available upon request.
|

Faucet Filter
|
This filter utilizes a 50 mesh screen to filter dirt and other debris from the
water. With 3/4" hose threads, this Filter attaches directly to the rain
barrel pump intake. Use the Hose Fitting to connect the 1/2" Poly Tubing to
this Filter. The inside mesh screen removes easily for cleaning
|
|
Easy Assembly, keeps debris out of pump. 50 mesh stainless steel screen
Designation 1/2" [13mm] Pipe Inlet, Polypro/Nylon
|
Pump cover
|
|
|
|
|
|
SafeRain Rainwater
Diversion Valve -- $120 |
 |
SafeRain is a first flush water diverter using flow-rate (FLOW-RATE DIVERSION) as the means of diversion as opposed to
the container method (poor man's roof washer) that traps the
first flush of water in a holding chamber at some point before
the tank.
SafeRain units are attached to the pipe that feeds the
collected rainwater to the water tank or cistern tank. At the
‘normal’ setting SafeRain will divert approximately 26.4
gallons and has a range of 0-528.3 gallons (4" pipes hold 0.65 gallons/foot). A collection chamber
using 10 feet of 4 inch pipe will only divert 6.5 gallons.
The Saferain first flush unit will save time and space. The
SafeRain can divert up to 9.2 gallons per minute.
The SafeRain is now available with metric to 4" schedule
40 adapters. The adapters are recommended for potable
rainwater collection. These adapters allow for permanent
connection with PVC pipe cement. The adapters are $25 each. The
SafeRain can also be installed with 4" rubber couplings (not
supplied) instead of the adapters.
Brochure |
|
|
|
|
|
|
|
With proper setup, the SafeRain can be used in
freezing environments.
|
|
How
SafeRain Works Vertical
Style Horizontal
Style Reverse
Flow Style
|
|
|
3P Technik Rainus --- $209.25
|
|
A rainwater filter-diverter that sends only cleaned filtered
water to your rain tank, and filters the dirt and leaf
diseases out to waste. Rainwater Filter for downspouts where
the cleaned rainwater flows on down into the downspout!
Install in the lower section of the downspout. Easy to monitor, easy
to install, with secure reliable function. Simple to maintain.
|
|
|
|
Ideal for:
|
Covers 753 sq. ft. of collection area.
|
- rainwater harvesting
- soakaway systems
- stormwater
- balancing systems
- silt trap replacement
|
|
|
|
3P Technik Filter Collector |
 |
|
- Attached adapters fits 3" round downspouts and 2.6" square and downspouts.
- Remove adapters and attaches to 4" downspouts.
- Connector for 3" intake to rain barrel or cistern.
- Adapter for connections to 2" or 1-1/2" with
rubber coupling.
- Removable Cartridge.
- Stainless steel filter mesh at 1mm to 0.7mm.
- Settings for winter and summer conditions. Twist 180° to
remove cartridge filter, no need is demount filter body.
|

|
|
Great for Rain Barrel Filters
|
|
$114.75
|
|

|
Covers 753 sq. ft. of collection area. The
Filter Collector comes with downspout adapters for top and bottom
connections, reducing rain barrel intake adapter that can be
removed to use 3" connection, and the stainless steel
cartridge filter.
|
- Rainwater is channeled from the filter entrance to the
sieve cartridge.
- Dirt is rinsed to the sides, and into the sewer.
- Cleaned water is led through the cartridge’s outlet
channel into storage.
|
- Filters and collects rainwater for
rain barrels and rain tanks. Can be turned on or off.
- Overflow function. Simple installation. This clever product
has a unique adapter mechanism that fits nearly all down pipes
between 2.5" -3.9". The adapter mechanism can be
removed to attach to 4" downspouts.
-
Easy to maintain, filter cartridge with draws to side.
- Due to the spigot (male) outlet connection at the bottom, the
ID of any connecting down pipe piece below must be 2.5" or more when square or
2.6" or more
when round. (Small old round cast iron pipes may not fit if the
ID of the pipe is less than 2.6"). 3" round
downspouts are optimum with the adapter.
- The outlet channel can easily be connected with rubber couplings to standard
PVC 1-1/2", 2", or 3" pipes.
|
|
|
3P Technik Zisternen Filter ZF Tank Filter |
| For roof areas up to 2150 ft2.
For installation within rainwater tanks. Two step cleaning
system. The first coarse filter mesh protects the second, finer
mesh by removing larger leaves and particles. Retro-installation
of 3P Back Washing Device is possible. The height difference
between rainwater inlet and outlet into the sewer is just 4.6
inches. Is easily connected to 4" PVC pipe using 4"
flexible pipe couplers. |
 |
 |

|
|
$485.00 |
|
|
- Rainwater is led onto the first filtration step.
- Coarse and larger dirt particles are led away to
sewer/waste
- The pre-filtered rainwater, having passed the primary
filter, reaches the second and finer filter. From here finer
dirt passes to waste, clean water to the tank.
- The cleaned rainwater is led through a calmed flow inlet
into the rainwater tank
- Due to the steep inclination of the fine filter and its
smooth surface structure the dirt is quickly cleaned away
into the sewer.
|
Benefits of Cistern Pre-Filters:
- Improve the rainwater quality.
- Reduce cistern maintenance.
- Extend life of your pump.
|
|
|
Constant Volume First Flush Roof Washer Valve Assembly ----
$5.00 |
 |
 |
The first flush of rainwater coming from the roof at the
beginning of a rain storm carries all of the particles and debris from
the roof top such as bird feces and air pollution. This simple and effective roof washer
assembly diverts the
first flush into a constant volume container or PVC stand pipe. Once
the stand pipe is full, a float valve closes the stand pipe inlet and
diverts the cleaner water to the cistern. A small valve is
required that is slightly open that will allow the stand pipe to drain
slowly after the rain has subsided. The stand pipe will then be empty and
ready for the next rainfall. The 2.75 inch diameter has the flow capacity
62 gallons per minute. This equates to one inch of rainfall in ten
minutes for a 1000 sq. ft. roof area. A 2.75 inch diameter
throughput is adequate 99% of all rainfalls. If more flow capacity
is desired, a 4 inch diameter PVC flow capacity can be
achieved by placing two of these roof washers on the same down spouts in
parallel increasing the flow capacity to 124 gallons per minute.
This first flush float valve can be adapted to 3" PVC down spouts
using a 4" to 3" flush adapter on both sides of
the tee. The first flush assembly includes the float valve and
upper and lower seats to contain the ball valve in the flush cleanout
tee with cleanout plug. The assembly does not include the tee nor
the cleanout plug. The recommended standpipe capacity is
one gallon per 100 square feet of roof collection area. A 4"
PVC pipe will hold 1.3 gallons of water per two feet of length. A
6" PVC pipe will hold 1.5 gallons of water per one foot of
length. A 3/4"
garden drain valve can be used for the stand pipe drain. The
first flush float
valve assembly is sold without the constant volume stand pipe or container.
Brochure.
|
Benefits of First Flush Diverters:
- Improve the rainwater quality.
- Reduce cistern maintenance.
- Extend life of your pump.
|
|
|
Constant Volume First Flush Drain Valve
Connects to end of 4" PVC pipe used for collection of
the first flush of rainwater from the roof. Uses drain cock
valve. Also has clean out plug.
|
|
$17.00
|
|
|
|
|
3P Technik Volume Filter VF1 - Horizontal Outlet ---
$492.75 |
 |
Benefits of Cistern Pre-Filters:
- Improve the rainwater quality.
- Reduce cistern maintenance.
- Extend life of your pump.
|
The VF1 volume filter takes two 4"
inlets and provides 0.55 millimeter sediment prevention. 1) The
water level rises and builds up in the sump and is equally
distributed across the cascade. 2) Pre cleaning through the
cascades. Largest dirt particles are led across the primary
filter cascades directly to the dirty water outlet. 3)
Pre-filtered water then flows over the secondary filter sieve (0.55
mm mesh size). Due to the special mesh structure of the sieve,
any dirt washes directly into the dirty water outlet which means the
filter is self cleaning with very low maintenance. 4) Clean water
flows to the cistern. 5) Dirt goes to the dirty water outlet. Is easily connected to 4" PVC pipe using 4"
flexible pipe couplers with a metal support.
Brochure
|
 |
|
|
|
16" Diameter Poly Cistern Basket Strainer |
 |
18 Mesh, approximately 1 mm openings. Fits
inside 16" manways on the Poly Tanks and Cisterns. Great for
added protection roof filtering. 16" in diameter and 7"
in depth. Filters out large organic debris, leaves, twigs, etc. |
 |
|

|
|
$42 |
|
|
|
|
5 Gallon Pail Mesh Filters |
|
 |
|
|
 |
| Buy 5 get 10% off.. Buy 10 get 15% off. |
Buy 5 get 10% off.. Buy 10 get 15% off. |
| Build your own roof washer second stage with this
75 micron mesh filter to get cleaner water in your cistern
or rain barrel. Fits inside all 5 gallon pails. $15.95 |
|
Build the first stage of a roof washer with this
200 micron mesh
filter. Fits on the top of a most 3 or all 5 gallon pails. Can be
used alone or with the 75 micron mesh filter. $13.95 |
|
|
|
|
|
|
|
|
Pura UV20-1 |
 |
$444.00
The Pura UV20 - 1 has a 10 gallon per minute flow rate at 65psi. 120V
60Hz. 3/4" female inlet/outlet and a stainless steel UV reaction
chamber. Uses a 16,000 microwatt seconds/cm2 UV lamp. The lamp uses 22
watts of power. UL listed in U.S. and Canada. CE listed. Also has an
electronic lamp indicator (LED). The dimensions are 25" x 5.5"
x 5.5". The inlet and outlets are ¾" NPT. The lamp requires
replacement annually. Requires a minimum of 5 micron sediment
filter. A whole house hold filtering system requires a 20 micron
sediment filter, 3 to 5 micron sediment filter with or without carbon
filtering, and then a UV sterilizer. Requires the 20 micron
sediment filter and 3 micron taste and odor filter below. |
 |
|
|
 |
|
|
20 micron Sediment and Rust Filter |
 |
|
$48.00
10 gpm max flow rate filter in clear styrene housing. Removes all
particles greater than 20 microns. Clear housing allows quick filter
inspection. 3/4" NPT female connections. 5-1/4" diameter
by 12-5/8" height. To protect the sediment filter, use
the 20x20 mesh prefilter listed above in the pump section. |
Replacement Cartridge: $7.95 |
|
|
|
|
Used in conjunction with the 3
micron and UV20-1 for potable water. |
|
|
3 micron Taste and Odor Filter |
 |
|
$128.00
8 gpm max flow rate filter in clear styrene housing. Clear housing
allows quick filter inspection. Install after the 20-micron
sediment and rust filter cartridge. Removes all particles greater
than 3-microns and removes odors and foul tastes. Removes
particles before the UV treatment filter. 3/4" NPT female
connections. 5-1/2" diameter by 24-/2" height.
Includes mounting bracket. Used in conjunction with the 20
micron and UV20-1 for potable water. |
Replacement Cartridge: $37.95 |
|
|
|
|
Pura UV20-3 |
 |
Three Filters in one! Sediment
filter, carbon filter, and an UV filter, all in one system. In
addition to disinfection, the triple models provide filtration for
the removal of sediment and chemical contaminants. The flow
rate is 8 to 10 gpm. It is great for a whole house hold filter
system. The UV20-3 features an electronic lamp indicator (LED)
and 115V standard voltage. Has a 3/4" inlet and outlet
NPT fittings. Uses UV lamp #20 and uses 22 watts. The
dimensions are: 25" x 5 1/2" x 17". Comes with
a 5 micron and 10 micron carbon block filter. Dimensions: 25.0” (63.5 cm) x 16.0” (40.6 cm)
x 5.5” (14.0 cm) |
|
|
Replacement filters: 5 micron Sediment and
10 micron Carbon Block, $69.00 |
|
|
|
|
$599.00 |
|
|
|
Aquasana® Pure Shower System – Free
Shipping ***Best
Seller*** |
 |
People with asthma,
bronchitis, respiratory problems and skin conditions all experience
surprising improvements from showering in filtered water. Everything
from childhood asthma to breast, bladder, and colon cancer have been
linked to the accumulation of chlorination by-products in our blood
and fat tissue. And the recent realization that 2/3s of our exposure
to chlorine comes from inhalation and skin absorption has caused an
upspring of interest in shower filtration products. This patented 3
piece design allows for maximum effectiveness, less than 5% pressure
drop, trouble free operation, easy cartridge replacement and no loss
of height. The 2 stage filter cartridge offers the very highest
level of performance possible, truly a remarkable product!
Great for the dorms and apartments! |
Voted Best Buy 2006 by Consumers Digest
Magazine |
 |
| Free shipping via FedEx Ground |
|
|
$67.99 |
In A Second Stage a high grade of coconut shell carbon
is used for the reduction of synthetic chemicals that can vaporize
and be inhaled with steam while showering. |
|
|
|
Pure Shower Replacement Cartridges-$42.00
|
- Filter life 10,000 gallons/6 months.
- Cost of use 21¢ a day.
|
|
|
|
|
Aquasana® AQ-4000 Water Enhancement System – Free
Shipping |
 |
Free shipping via FedEx Ground |
This patented twin cartridge drinking
water filter installs in seconds to standard kitchen faucets and
provides up to 30 gallons an hour of ultra-filtered high quality
water for drinking, cooking and other beverages. Includes filter
housing‚ chrome faucet diverter‚ twin filter cartridge set
(lasts 6 months/filters 500 gallons), easy to follow instructions
and cartridge re-order forms. Replacement filters cost $43.31 every
6 months/500 gallons...that's only 9¢ a gallon/ $7.50 a month for a
virtually unlimited supply of "healthy water".
Great for the dorms and apartments! Can be installed under the
sink with the conversion kits listed below. |
| Better than Bottled
Water!!! |
|
$99.99
|
The Aquasana AQ-4000 can also be installed
as an Under sink System with Deluxe Sink-Mounted Push-Button Faucet. |
|
Includes 2 filter cartridges‚ faucet
adapter & instructions. Installs on counter top. |
| Voted Best Buy for home water filter,
2003/2004/2005/2006 By Consumers Digest 100% satisfaction
guaranteed! Click
here to view the Aquasana AQ-4000 Home Water Filtration System Certified Performance Data Sheet |
|
Replacement Cartridges-$47.99 |
Click
here to see a product comparison between top six water filters and
the aquasana® AQ-4000. |
|
|
|
|
|
Sink Conversion Kits
|
|
Use the sink conversion kit to mount the filter system under the
sink. To undersink models are available, the Standard and the
Premium. The Premium conversion kit is brushed nickel made to last. Included are instructions to install.
Requires a standard 7/8 accessory
hole for installation.
|
|
Premimum - $75.96
|
|
Standard - $43.99
|
|
 |
The Standard Conversion Kit
|
|
|
|
|
By popular demand, we are proud to introduce the AQ-4055 brushed
nickel undersink faucet kit. This attractive new design uses a
high-grade porcelain internal valve for smooth, effortless on/off
motion. Attractive, durable, lead free and maintenance free... No
o-rings or washers to replace and no mineral build-up problems.
It's easy to install and gives a designer touch to "Healthy
Water" by Aquasana!
Kit includes mounting bracket, supply line "T" fittings
(3/8" brass and 1/2" PVC provided for 98% installation
without a trip to the hardware store), deluxe faucet and illustrated
instructions.
This premium kit is the same as the Standard AQ-4050 Under-Sink
Install Kit for the Aquasana AQ-4000 Water Filter System, but includes
this premium brushed nickel Pressure Relief faucet.
|
|
|
Aquasana® Rhino® Whole House Water Filtration
System – Free
Shipping |
 |
$876.00
Rhino EQ-300 Whole House Water Filter System... The
ultimate home appliance! Healthy water throughout the entire
household for about 50¢ a day! Perfect for filtering
municipal water, rainwater, and well water. Unit is 46" tall, 10" round at base.
|
 |
| Stage 1: The sediment pre-filter
uses a replaceable cartridge that mechanically filters down to five
microns. This important first stage filters the sediment that may be
in the water supply so that it doesn't clog the main filter and
reduce water flow and/or filter life. |
 |
| Stage 2: A natural media made of
zinc and copper where granules are fused together by the process of
water atomization. This combination creates an active filtration
method, possessing a characteristic known as redox potential.
This process effectively reduces chlorine taste and odor from tap
water. |
|
| Stage 3: Contains a large granule
bituminous activated carbon for further reduction of chlorine taste
and odor. |
| Stage 4: Contains a small granule
coconut shell based activated carbon for an expanded surface area,
which provides the highest reaction kinetics and absorptive capacity
for the very best water possible. |
|
$876.00 |
Free shipping via FedEx Ground |
|
|
Purity Filtered Sports Water Bottle |
 |
The Purity Filtered Sport Bottle offers the quality of
bottled water with the convenience and economy of tap water! This
unique product allows you to use any tap water source and have great
tasting, healthy filtered water. Great for the office, school, gym,
shopping, travel or anywhere! The replaceable filter cartridge
removes lead, chlorine and chemical contaminants for 30 gallons/ 60
days. This is a must product for everyone! Comes with 3 filter
cartridges, a 6 month supply. |
|
|
$25.56 |
|
|
|
|
|
The Original Rain Barrel Color Wraps
|
|
$49.00
|
- Reduces algae growth in
translucent & light colored rain barrels
- Reduces UV light
penetration for barrels without UV protection
- Helps insulate the
rainwater in direct sunlight
- Incentive to use recycled
drums
- Decorative colors blends
well with home
- No messy paint
- Three attractive colors,
Brick Red, Chocolate, and Tan
- Easy to Install
- Hides exterior blemishes
on recycled barrels
- Turn your plain blue & white rain barrels into a garden
feature
- Brochure
|
|
|
|
|
|
Why
Paint It When You Can Wrap It!
|
|
The Niño Rain Barrel
|
|
|
|
The Niño rain barrel is the newest addition to The Rain Well's
selection of rain barrels. It is a combination 55 gallon rain barrel and
planter. It is very decorative and integrates nicely with your
landscape design and home. It fits in with other planters you
will have around your home. Great for Herb gardens. Without looking closely, no one
will know its a rain barrel! It is compact and easily
shipped. The Niño has a 3/4" drain valve with garden
hose threads at the very bottom and an 1-1/2" hidden
overflow. The Niño is available in 13 colors, plus an
additional 13 colors with speckles. It is recommended to use
dark colors such as dark green and dark brown so as to inhibit the growth of algae. As you
can see by the photos, the installation is not complicated.
The downspout only needs to be just above the inlet. Some
assembly is required. Dimensions: 25'x25"x25"
|
|
$170.00
|
|
|
|
|
|
The Second Life Rainwater Harvesting
Rain Barrels |
These rain barrels can be used to collect and store rainwater, gray water, and recovered
household water. These products have enjoyed a previous life as food and
liquid containers and are ready to begin their second life.
These FDA food grade handling products have been selected for
early retirement and look forward to new adventures! So instead
of buying new barrels and drums, purchase these to keep recycled
materials out of the land fill. These rain barrels have a
drain valve at the bottom with garden hose threads, a removable screen
lid, and an 1-1/2" internal overflow. The screened lid keeps
out mosquitoes, organic debris, small animals, rodents, birds, and large
particles. Blue is the only color available, but spray paint for
plastic is available at hardware stores. You can paint them any
color you desire! The lid can be removed to clean the inside of
the barrel. The dark blue color also provides the means to curb
algae growth! An elevated spigot can be added to fill up your
watering pail to water indoor plants. Also available are fittings
to mate several of these barrels together to increase the storage
capacity. Fabricated in the Dallas-Fort Worth Texas Metroplex. |
$107.00
39" in height
24" in diameter at top
19.5" in diameter at bottom
25 pounds
|
|
|
|
Click here for a
color brochure |
| Companion tanks are also available.
Companion tanks mate to rain barrels to increase the capacity of the
rain barrel system. Click here for prices
and available accessories. |
 |
Rain barrels purchased can be picked up or arrangements for delivery can be
made. To order, contact
The Rain Well. |
The Second Life Rain Barrels can
be purchased at these fine locations:
----- Eden's Organic Garden Center at 4710 Pioneer Rd., Balch Springs
Texas, 214-348-EDEN (3336) |
|
The RB80g Emerald & Chocolate Rain Barrel
|
 |
The RB80g rain barrel has all of the
essential elements plus extra features for effective rainwater
collection, storage, and distribution. This rain barrel holds 80
gallons and has a reinforced "flat" back that fits nicely
against walls. The RB80g rain barrel is available in two solid poly
resin colors, Emerald and Chocolate and are not painted. These rain barrels are decorative
and will complement any home and landscape. Two models are
available, the standard RB80g and the RB80g Deluxe.
Manufactured in the Dallas-Fort Worth Texas Metroplex.
Discounts on blemished rain barrels. |
 |
| $225.00 |
| Screened Lid |
 |
35” height x 26” width x 23” depth
32” width x 26” depth lid |
Internal Overflow |
 |
RB80g
Brochure (pdf) |
 |
 |
The RB80g Rain Barrels can
be purchased at these fine locations:
-----
|
 |
|
|
Polypropylene Compression Bulk Head Fittings |
|
|
Ideal for curved surfaces such as 55 gallon drums. Can be used on
metal, plastic, fiberglass, tubs, stock tanks, rain barrels, and recycled drums.
Ideal for 3/4" drain valves, 3/4" bucket high spigots, overflows, and rain barrel
mating. Can be used to replace worn out threads on rain barrels with
a makeshift fitting-tapped hole. Bulkhead fittings for 3/4",
1-1/2", and 2" pipe thread connections. Replace the
3/4" overflow with a higher capacity 1-1/2" or 2" bulkhead
fittings for the occasional downpour so that the rain water does not
overflow from the top of the rain barrel. Bulkhead fittings require
access to the inside of the tank or barrel. The poly bulkheads have
female pipe threads on both sides.
Discounts: 5-9:5% 10-49:12.5%
50-74:30% 75+:35%
|

|
|

(click to enlarge)
|
|
| 3/4" - $6.00 (cut 1-3/4" hole) | 1-1/2"
- $8.00 | 2" - $9.00 (cut 3" hole) |
|
|
All fittings are available in natural color. 2" fittings
are also available in Black
|
|
|
Rubber Grommets |

(click to enlarge) |
Rubber grommets provide support for inlets and overflow pipe
at the cistern wall. Can be used for poly or metal cisterns. These grommets are available that mate with Schedule 40 4", 3", 2", and
1-1/2" pipes. These grommets are used for inlets and
overflows for rain
water harvesting cisterns using 6", 4", 3", 2", and 1-1/2"
inside diameter pipes. These grommets are great for
rain barrels and cisterns where there is no access to the inside of the
barrel or cistern. The 1-1/2" and 2" grommets are
suitable for smaller diameter barrels such as 55 gallon drums for overflows
and barrel mating at the top side of the rain barrel and
cistern. Shown below is an overflow connection. The
grommet size specifies the schedule 40 or 80 pipe. Use a hole
saw or jigsaw to cut out holes.
Discounts: 5-9:5% 10-49:12.5%
50-74:30% 75+:35% |
|
| 1-1/2"
- $3.00 (cut a 2-1/4" hole) |  |
| 2"
- $3.75 (cut a 2-5/8" hole) |

(click to enlarge) |
|
|
3" - $4.00
(cut a 3-3/4" hole)
4" - $16.00 (cut a 5"
hole)
6" - $24.00 (cut a 7"
hole)
|
|
|
|
|
¾” Garden Drain Valve
|
 | This
¾" garden hose drain valve
has garden hose threads and easily connects to a ¾" compression bulk head fitting. It is a simple 90 degree turn
ball valve with ¾" garden hose threads. Available in poly, zinc,
and brass housings. |
|
|
Poly Housing |
$8.90 |
|
|
Zinc Housing |
$9.90 |
|
Brass Housing |
$14.60 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-1/2" Companion Tank Link Kit |
 |
The link kit is used to connect rain barrels to a series of one or
more companion tanks. This in effect increases the capacity of
the rain barrel. All that is needed is an extra drum or barrel
and a drain valve at the bottom. The link kit includes two
1-1/2" rubber grommet fittings and one foot of PVC flex. |
|
$15 |
|
|
8" Basket Strainer for Rain Barrels |
 |
Now Available
8" diameter baskets strainers for rain barrels. Cut a hole
on the top of the rain barrel and set it in. Collects
larger debris. Can be used for closed top drums. $31.00
|
 |
|
|